Wine Guardian WG15 Installation, Operation And Maintenance Manual page 51

室温偏差
Room temperature
offset
相对湿度偏差
RH offset
47
设置 13

按下"设置"按钮进入设置 13。

按"向上"或"向下"箭头按钮以调整到所需的设
定点。最大设置为+5°F，最小设置为-5°F。出
厂默认值为零（0） 。
室温偏移将实际显示读数（仅温度）更改为
该设置值。
示例：传感器读数 = 55°F (13°C)
设置 15 设置为+4
显示读数 = 59°F (15°C)
Setting 13

Press "Settings" button to advance to
Setting 13.
 Press the "Up" or "Down" buttons to
adjust to the desired set point. Maximum
setting is +5°F, minimum setting is -5°F.
Factory default is zero (0).
Room temperature offset changes the
actual display reading (temperature only)
by the value of this setting.
Example: Sensor reading = 55°F (13°C)
Setting 15 set to +4
Display reading = 59°F (15°C)
设置 14

按下"设置"按钮进入设置 14。

按"向上"或"向下"箭头按钮以调整到所需的设
定点。该设置可将%RH 读数调节为+/-10%。
出厂默认值为 0%RH。
Setting 14

Press "Settings" button to advance to
Setting 14

Press the "Up" or "Down" buttons to adjust
to the desired setpoint. This setting allows
the adjustment of %RH reading by +/-10%.
Factory default is 0%RH.