Adjustment Of Camera Fol Voltage - Canon XJ22 7.3B Series Operator's Manual

Adjustment of Camera Fol Voltage

The camera fol voltage is adjusted at the time of shipment. There is no need to change usually.
However, the lens side can be changed by the situation on the camera side (indicators, etc.).
The camera fol voltage is used by all users.
There are the voltages sent back to the camera for zoom, iris and focus.
A password is required in order to ensure that the content of the setting is not easily changed.
Please contact Canon Inc. or the distributing agent when you need the password.
Top initial screen
[ ] 1
Menu
[ IND ] I G : 5 0
EXT VTR
A 1 V
FRM1 RET
A 2 R
Info screen
1
Info
Display: IND
Encoder: OFF
CamSeri: ON
Info 1
Encoder:
OFF
CamSeri: ON
Adjust
Adjust
Camera Fol
Camera Fol
Iris:
Zoom:
Focus:
EnterPassword
Info – Adjustment of Camera Fol Voltage
1. Push the key, push the
The display is switched to the Info screen.
2. Move the key four times.
An underline appears below [Adjust].
3. Push the Set key.
4. Move the key, and push the Set key.
The display is switched to the Camera Fol screen.
5. Move the key once to select Iris.
Move the key twice to select Zoom.
Move the key three times to select Focus.
Then, push the Set key.
The display now changes to the EnterPassword screen.
key and push the
Set
Continued on next page
4. Menu screen – Info
key.
E4-59