Setting The Frame Preset1 Focus To On Or Off; Setting The Frame Preset1 Focus To On Or Off Top - Canon XJ22 7.3B Series Operator's Manual

4. Menu screen – Preset

Setting the Frame Preset1 focus to ON or OFF

The focus operations up to the memory position can be enabled or disabled. (Bear in mind that the display is switched
to another screen when this setting is performed.)
IMPORTANT:
Top initial screen
[ ] 1
Menu
[ IND ] I G : 5 0
EXT VTR
A 1 V
FRM1 RET
A 2 R
Preset screen
Preset
Frame1: PRE
Frame2: PRE
ZSpeed: 800
Screen A
Preset
Frame1: PRE
Frame2: PRE
ZSpeed: 800
Frame1 screen
Preset
Frame1: PRE
Zoom: ON
Focus: OFF
Preset
Frame1: PRE
Zoom: ON
Focus: ON
Screen A
Preset
Frame1: FAST
Frame2: PRE
ZSpeed: 800
(D)
Selection item
Focus operations
Function
disabled
(D): Default value
Menu
E4-30
Preset – Setting the Frame Preset1 focus to ON or OFF
Prior to operation, select the user for whom the setting will be made.
(For details on how to select the user, refer to page E3-4 or E4-4.)
1. Push the
The display is switched to the Preset screen.
2. Push the
An underline appears below [Frame1].
3. Push the Set key, and push the
The display is switched to the Frame1 screen.
An underline appears below [Focus], and the last setting
or default value is highlighted.
4. Push the
Push the left or right key to select {ON} or
{OFF}.
5. Push the Set key.
The displays returns to Screen A.
OFF ON
Focus operations
enabled
x2 Preset
Set
key, push the Set key, and push the
key.
key twice.
key or key.
Set
Top
key twice.
x2 or
Set