Frame Preset1 Zoom On/Off Selection - Canon XJ22 7.3B Series Operator's Manual

(2) Frame Preset1 zoom ON/OFF selection

This makes it possible to select enable or disable for the zoom operations up to the memory position.
(Bear in mind that the display is switched to another screen when this zoom operation is set.)
IMPORTANT: Prior to operation, select the user for whom the settings will be made.
(For details on how to select the user, refer to page E3-4 or E4-4.)
Top initial screen
[ ] 1
Menu
[ IND ] I G : 5 0
EXT VTR
A 1 V
FRM1 RET
A 2 R
Screen A
[ ]
Menu 1
[ Z.M. ] [Trk]OFF
[CAFS] ON
Auto
[ Frm1 ] [ Frm2 ]
Preset screen
Preset
Frame1: PRE
Zoom: ON
Focus: OFF
Preset
Frame1: PRE
Zoom: ON
Focus: OFF
Preset
Frame1: PRE
Zoom: OFF
Focus: OFF
(D)
ON
Selection item
Zoom operations en-
Function
abled
(D):
Default value
x5
[ IND ]
1. Push the key five times.
The item is now highlighted.
2. Push the key.
Set
The display is switched to the Preset screen.
3. Push the key.
An underline appears below [Zoom].
The last setting or default value is highlighted.
4. Push the key or
Push the left or right key to set the function to {ON} or
{OFF}.
5. Push the key.
Set
The display returns to Screen A.
OFF
Zoom operations dis-
abled
[ Frm1 ]
Set
key.
or
3. Top screen – Frame Preset1 zoom ON/OFF selection
3. Top screen
[ Frm1 ]
Set
E3-15