Setting The Analog Demand Curve Characteristics - Canon XJ22 7.3B Series Operator's Manual

Setting the analog demand curve characteristics

The characteristics of the zoom speed can be varied in response to the amount by which the analog demand is tilted.
(Bear in mind that the display is switched to another screen when these characteristics are set.)
IMPORTANT: Prior to operation, select the user for whom the setting will be made.
(For details on how to select the user, refer to page E3-4 or E4-4.)
Top initial screen
[ ] 1
Menu
[ IND ] I G : 5 0
EXT VTR
A 1 V
FRM1 RET
A 2 R
Zoom screen
[ ]
Zoom
Tracking: OFF
F-Hold: OFF
Movement
Screen A
[ ]
Zoom
Movement
CurveMode OFF
Control:
CurveMode screen
[ ]
Zoom
CurveMode
Demand: 5
[ ]
Zoom
CurveMode
Demand: D5
[ ]
Zoom
CurveMode
Demand: 7
Selection
1
item
Set
Menu
1. Push the
The display is switched to the Zoom screen.
2. Push the
An underline appears below [CurveMode].
3. Push the
Set
The display is switched to the CurveMode screen.
4. Push the
An underline appears below [Demand].
The function set last or default function is
highlighted.
5. Push the
Push the left or right key until the function
to be changed to appears.
6. Push the
Set
The display returns to Screen A.
2 3 4
x4 Zoom
key, push the key and push the
Set
key four times.
key.
key.
key or key.
key.
D5 6
(D): Default value
[ ]
x4
Set
Zoom – Setting the analog demand curve characteristics
4. Menu screen – Zoom
key four times.
Amount of change resulting
from zoom mode adjustment
MAX
(9)
(1)
Amount by which analog demand is tilted
Zoom direction
Wide angle Telephoto
7 8
or
9
Set
E4-49