Copying The Settings Established For One User To Another User - Canon XJ22 7.3B Series Operator's Manual

4. Menu screen – User

Copying the settings established for one user to another user

The settings established for one user can be copied to another user.
IMPORTANT:
Top initial screen
[ ] 1
Menu
[ IND ] I G : 5 0
EXT VTR
A 1 V
FRM1 RET
A 2 R
User screen
1
User
No. : 1
Name:
ResetAll
Screen A
1
User
ResetAll
Copy
ToOtherLens
Copy screen
1
User
Copy
To No. : 1
Copy: y/n
1
User
Copy
To No. : 1
Copy: y/n
1
User
Copy
To No. : 3
Copy: y/n
1
User
Copy
To No. : 3
Copy: y/n
E4-8
User – Copying the settings established for one user to another user
Prior to operation, select the user for whom the settings will be made.
(For details on how to select the user, refer to page E3-4 or E4-4.)
1. Push the
The display is switched to the User screen.
2. Push the
An underline appears below [Copy].
3. Push the Set key.
The display is switched to the Copy screen.
4. Push the
An underline appears below [To No.].
5. Push the
Push the left or right key until the user serving
as the copy destination appears.
6. Push the
An underline appears below [Copy], and either
{y} (YES) or {n} (NO) can now been selected.
key,and push the Set key.
key four times.
key.
key or key.
key.
The operating steps taken
between steps 1 to 7 (within the
two dotted parallel lines) can
be undone without copying the
settings. To return to the origi-
nal screen, push the up key.
To turn off the display without
copying the settings, push the
DISPLAY switch.
Continued on next page