Initializing; Initializing The Settings Established For One User - Canon XJ22 7.3B Series Operator's Manual

4. Menu screen – User

Initializing

(1) Initializing the settings established for one user

The settings established for one user can be initialized so that they are returned to the default values.
IMPORTANT:
Top initial screen
[ ] 1
Menu
[ IND ] I G : 5 0
EXT VTR
A 1 V
FRM1 RET
A 2 R
User screen
1
User
No. : 1
Name:
A
ResetAll
Title Reset
1
User
Name:
A
ResetAll
Copy
Reset screen
1
User
ResetAll
User: y/n
AllUser: y/n
User 1
ResetAll
User: y/n
y/n
AllUser:
1
User
ResetAll
User: y/n
AllUser: y/n
Title Reset
1
User
Name:
ResetAll
Copy
Menu
E4-6
User – Initializing (1) Initializing the settings established for one user
Prior to operation, select the user for whom the settings will be made.
(For details on how to select the user, refer to page E3-4 or E4-4.)
※ (NOTE): The following items are the only values which are not initialized:Auto
1. Push the
The display is switched to the User screen.
2. Push the
An underline appears below [ResetAll].
3. Push the Set key.
The display is switched to the Reset screen.
4. Push the
The operator is asked whether the settings of
the preselected user are to be initialized or not.
5. Push the
6. Push the Set key to enter the decision.
User 1
Reset Now.
The screen now shows the "Reset Now" (initializing) message
for a few moments before returning to Title Reset.
This completes the initializing.
User
Set
iris gain value,Remote iris gain value,F-Hold setting,Encoder output
setting,IND screen follow-up display setting,Switchable setting,default
screen settings and Adjustment of Camera Fol Voltage.
key,and push the Set key.
key three times.
key.
key to select {y}.
x3
1
Set
The operating steps taken be-
tween steps 1 to 5 (within the
two dotted parallel lines) can be
undone without initializing the
settings. To return to the origi-
nal screen, push the up key.
To turn off the display without
initializing the settings, push the
DISPLAY switch.
or
Set