Setting The Zoom Stop Characteristics For Preset Operations - Canon XJ22 7.3B Series Operator's Manual

4. Menu screen – Preset

Setting the zoom stop characteristics for preset operations

The zoom stop characteristics used when preset operations have been performed can be set.
IMPORTANT:
Top initial screen
[ ]
Menu Menu
[ IND ] I G :
EXT
A 1 V
FRM1
A 2 R
Preset screen
Preset
Frame1: PRE
Frame2: PRE
ZSpeed: 800
Screen A
Preset
Frame2: PRE
ZSpeed: 800
ZMovement
ZMovement screen
Preset
ZMovement
Start: 99
Stop: 91
Preset
ZMovement
Start: 99
Stop: D91
Preset
ZMovement
Start: 99
Stop: 70
Selection item
Function
Slow stop
Menu
E4-36
Preset – Setting the zoom stop characteristics for preset operations
Prior to operation, select the user for whom the setting will be made.
(For details on how to select the user, refer to page E3-4 or E4-4.)
1
5 0
VTR
RET
1. Push the
The display is switched to the Preset screen.
2. Push the
An underline appears below [ZMovement].
3. Push the Set key.
The display is changed to the ZMovement
screen.
4. Push the
An underline appears below [Stop], and the
last setting or default value is highlighted.
5. Push the
Push the left or right key until the number to be
changed to appears.
6. Push the Set key.
The displays returns to Screen A.
00 to
Quick stop
Default value: 91
x2 Preset
Set
key, push the Set key, and push the
key four times.
key twice.
key or key.
99
x4
key twice.
x2
Set
or
Set