Setting The Frame Preset2 Zoom To On Or Off; Setting The Frame Preset2 Zoom To On Or Off Top - Canon XJ22 7.3B Series Operator's Manual

4. Menu screen – Preset

Setting the Frame Preset2 zoom to ON or OFF

The zoom operations up to the memory position can be enabled or disabled.
(Bear in mind that the display is switched to another screen when the setting is performed.)
IMPORTANT:
Top initial screen
[ ] 1
Menu
[ IND ] I G : 5 0
EXT VTR
A 1 V
FRM1 RET
A 2 R
Preset screen
Preset
Frame1: PRE
Frame2: PRE
ZSpeed: 800
Screen A
Preset
Frame1: PRE
Frame2: PRE
ZSpeed: 800
Frame2 screen
Preset
Frame2: PRE
Zoom: ON
Focus: OFF
Preset
Frame2: PRE
Zoom: OFF
Focus: OFF
Screen A
Preset
Frame1: PRE
Frame2: PRE
ZSpeed: 800
(D)
Selection item
Zoom operations
Function
enabled
(D): Default value
Menu
E4-32
Preset – Setting the Frame Preset2 zoom to ON or OFF
Prior to operation, select the user for whom the setting will be made.
(For details on how to select the user, refer to page E3-4 or E4-4.)
1. Push the
The display is switched to the Preset screen.
2. Push the
An underline appears below [Frame2].
3. Push the Set key, and push the
The display is switched to the Frame2 screen.
An underline appears below [Zoom], and the last
setting or default value is highlighted.
4. Push the
Push the left or right key to select {ON} or
{OFF}.
5. Push the Set key.
The displays returns to Screen A.
ON OFF
Zoom operations
disabled
x2 Preset
Set
key, push the Set key, and push the
key twice.
key.
key or key.
x2
Top
key twice.
or
Set Set