5. OPERATION
5-1. ZOOM OPERATION
(A) MANUAL ZOOM OPERATION
Set the zoom operation change-over knob at the bot-
tom of the lens drive unit to the MANU.
CAUTION: The zoom mechanism can be dam-
Manual zoom operation with the zoom ring
●
Turn the zoom ring (itself or with the zoom lever) clock-
wise, as viewed from behind the camera, to zoom out (to
Wide-end).
Turn it counterclockwise to zoom in (to Telephoto-
end).
(B) SERVO ZOOM OPERATION
Set the zoom operation change-over knob at the bottom of the lens drive unit to the SERVO position.
For a smooth change, turn the change-over knob while
rotating the zoom ring slightly.
(B-1) BASIC SERVO ZOOM OPERATION
aged if the lens is forced to perform
manual zoom while the lens is set to
the SERVO side. Therefore, be sure
that the lens is set to the MANU.
side before performing manual zoom.
position.
Zoom Operation Change-over Knob
Zoom Ring
Zoom Lever
Zoom Operation Change-over Knob
E13
Wide
Tele