Mounting holes x4
[¼" (0.25") diameter]
3
~ 6 " (6.71")
4
1
~ 7 " (7.51")
2
7
~ 8 " (8.41")
16
Figure 2-5, MMS1012-G Model Dimensions
•
If installing in a recreational vehicle, do not attempt to use the
vehicle's metal frame in place of the negative connection or DC
ground. The inverter requires a reliable negative and ground
return path directly to the battery.
•
DC wires and cables should be tied together with wire ties or
electrical tape approximately every 6 inches (15.2 cm). This
helps improve the surge capability and reduces the effects of
inductance, which improves the inverter waveform and reduces
wear on the inverter's fi lter capacitors.
•
Use only copper wires with a minimum temperature rating of
75°C (167°F).
•
To ensure maximum performance from the inverter, minimize
all connections from the battery bank to the inverter
Exception: the DC overcurrent disconnect in the positive line.
© 2017 Sensata Technologies
10"
5
16 "
~
8
(16.59")
Installation
5
~ 4 "
8
(4.625")
~ 5"
1
~ 5 "
8
(5.125")
13