Magnum Energy MMS Series Owner's Manual page 3

Table of Contents

Advertisement

Safety Instructions
Conventions Used in this Manual (terminology)
Shorepower or External AC power – refers to alternating current
(AC) provided by the utility electric power grid or from a generator.
Mobile application – refers to inverters used in a recreational vehicle
(RV), boat, or a truck installation.
Safety Symbols
To reduce the risk of electrical shock, fi re, or other safety hazard, the
following safety symbols have been placed throughout this manual
to indicate dangerous and important safety instructions.
WARNING: This symbol indicates that failure to take a
specifi ed action could result in physical harm to the user.
CAUTION: This symbol indicates that failure to take a
specifi ed action could result in damage to the equipment.
Info: This symbol indicates information that emphasizes
or supplements important points of the main text.
IMPORTANT PRODUCT SAFETY INSTRUCTIONS
This manual contains important safety instructions that must be
followed during the installation and operation of this product. Read
all instructions and safety information contained in this manual before
installing or using this product.
All electrical work must be performed in accordance with local,
state, and federal electrical codes.
This product is designed for indoor/compartment installation.
DO NOT expose to rain, snow, moisture, or liquids of any type.
Use insulated tools to reduce the chance of electrical shock or
accidental short circuits.
Remove all jewelry (such as rings, watches, bracelets, etc.,) when
installing or performing maintenance on the inverter.
Always disconnect the batteries or energy source prior to installing
or performing maintenance on the inverter. Live power may be
present at more than one point since an inverter utilizes both
batteries and AC. Turning off the inverter may not reduce this
risk. As long as AC power is connected, it will pass through the
inverter regardless of the ON/OFF power switch setting.
Always verify proper wiring prior to starting the inverter.
Do not operate the inverter if it has been damaged.
Do not dismantle the inverter; there are no user-serviceable parts
contained in this product. Attempting to service the unit yourself
could cause electrical shock. Internal capacitors remain charged
after all power is disconnected.
ii
© 2017 Sensata Technologies

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mms1012Mms1012-g

Table of Contents