Wiring Guidelines; Figure 2-4, Mms1012 Model Dimensions - Magnum Energy MMS Series Owner's Manual

Installation
Mounting holes x4
[¼" (0.25") diameter]
5
~ 16 "
8
(16.59")

Figure 2-4, MMS1012 Model Dimensions

2.1.3 Wiring Guidelines

• Before connecting any wires, determine all wire routes to and
from the inverter throughout the home/offi ce, recreational
vehicle, or boat.
• Conductors passing through walls or other structural members
must be protected to minimize insulation damage such as chafi ng,
which can be caused by vibration or constant rubbing.
• Always check for existing electrical, plumbing, or other areas of
potential damage prior to cutting into structural surfaces or walls.
• Make sure all wires have a smooth bend radius and do not
become kinked.
• Both AC and DC overcurrent protection must be provided as part
of the installation.
• Ensure all conductor insulation is of a type that is approved for
the voltage, operation, temperature, and location of use.
12
10.0"
3
~ 6 " (6.71")
4
1
~ 7 " (7.51")
2
7
~ 8 " (8.41")
16
5
~ 4 "
8
(4.625")
© 2017 Sensata Technologies