M ounting holes x 4
[¼" (0.25") diameter]
~ 6
" (6.71 ")
¾
~ 7
" (7.51 ")
½
~ 8
" (8 .41 ")
7/16
Figure 10, MMS1012-G Model Inverter/Charger Dimensions
Wiring Guidelines
•
Before connecting any wires, determine all wire routes to and
from the inverter throughout the RV, vehicle, or boat.
•
Conductors passing through walls or other structural members
must be protected to minimize insulation damage such as chafi ng,
which can be caused by vibration or constant rubbing.
•
Always check for existing electrical, plumbing, or other areas of
potential damage prior to making cuts in structural surfaces or
walls.
•
Make sure all wires have a smooth bend radius and do not be-
come kinked.
•
Both AC and DC overcurrent protection must be provided as part
of the installation.
© 2010 Magnum Energy, Inc.
2.0 Installation
10 "
~ 16
"
5 /8
(16.59 ")
~ 4
"
⅝
(4.625 ")
~ 5 "
~ 5
"
⅛
(5.125 ")
13