Wiring Guidelines; Figure 8, Mm Series Inverter Dimensions - Magnum Energy MM Series Owner's Manual

2.0 Installation
[¼" (0.25") diameter ]
~ 16 "
5/8
(16.59")

Figure 8, MM Series Inverter Dimensions

Wiring Guidelines

• Before connecting any wires, determine all wire routes to and from
the inverter throughout the RV or vehicle/boat.
• Conductors passing through walls, bulkheads, or other structural
members must be protected to minimize insulation damage such as
chafi ng, which can be caused by vibration or constant rubbing.
• Always check for existing electrical, plumbing, or other areas of
potential damage prior to making cuts in structural surfaces, bulk-
heads, or walls.
• Make sure all wires have a smooth bend radius and do not become
kinked.
• Both AC and DC overcurrent protection must be provided as part
of the installation.
10
Mounting holes x 4
~ 6 " (6.71")
3/4
~ 7 ½" (7.51")
~ 8 " (8.41")
7/16
~ 4 "
11/16
(4.66")
10.0"
© 2010 Magnum Energy, Inc.