Advanced - ProSoft ICX35-HWC User Manual

ICX35-HWC Webpage
User Manual

3.2.2 Advanced

The Configuration > Advanced tab allows you to configure the following:

WAN

Cellular Usage Tracking

DDNS

VPN

Serial/Encapsulation
WAN
Parameter
User Name
Password
Wait Between Reconnect
Authentication
Roaming
Keep Alive
Keep Alive Ping Address
Keep Alive Ping Period
Page 22 of 79
Description
(optional) User Name for the connection
(optional) Password for connection
The number of seconds to wait before trying to establish a reconnect.
If this is set to '0', the auto connection is disabled.
PAP - Password Authentication Protocol
CHAP - Challenge Handshake Authentication Protocol
PAP & CHAP - A mix of both methods
This setting prevents the device from connecting to a non-native network,
helping to prevent additional charges.
If enabled (0 denoting Disabled), this parameter sets the keep alive ping
period time in seconds. When Enabled, the two fields listed below appear.
Time to keep a connected address connection alive
Number of seconds to ping to ping address in order to keep a connection
between a cell tower and a module alive
ICX35-HWC ♦ Industrial Cellular Gateway
ProSoft Technology, Inc.
April 21, 2016
3G/4G LTE