ProSoft ICX35-HWC User Manual page 14

Connecting to the ICX35-HWC
User Manual
5 Enter the End Device IP Address of the end device if you only have one
device. The end device is the device connected to the LAN port of the device
that the ICX35-HWC will access.
6 Choose whether or not to use DHCP
Protocol)
If YES, Enable the DHCP option and select a DHCP Range of IP
a)
addresses applicable to multiple End Devices.

DHCP Range – This allows you to enter a range of IP addresses that
can be addressed. For example, if you have a number of devices
connected to a remote ICX35-HWC, you can enter the DHCP range to
use on devices connected to the remote ICX35-HWC.

Lease Time – Enter the desired lease time using seconds, minutes,
or hours. This setting depends on your cellular plan.
Page 14 of 79
for end devices.
ICX35-HWC ♦ Industrial Cellular Gateway
(Dynamic Host Configuration
3G/4G LTE
ProSoft Technology, Inc.
April 21, 2016