Configuration; Basic - ProSoft ICX35-HWC User Manual

ICX35-HWC ♦ Industrial Cellular Gateway
3G/4G LTE
3.2

Configuration

3.2.1 Basic

The Configuration > Basic tab allows you to configure the Module and LAN
settings.
Module Settings
Parameter
Module Name
APN Name
LAN Settings
Parameter
LAN IP Address / Subnet Mask
Enable DHCP
End Device IP Address
DHCP Range
Lease Time
ProSoft Technology, Inc.
April 21, 2016
Description
Name of ICX35-HWC on network
Access Point Name of the network path for cellular connectivity
Description
IP address of the ICX35-HWC ethernet port
Enables/Disables DHCP functionality
Used when DHCP is disabled. IP address of end device.
Used when DHCP is enabled. DHCP range of end devices
Used when DHCP is enabled. Enter the desired lease time using
seconds, minutes, or hours. This setting depends on your
cellular plan.
ICX35-HWC Webpage
User Manual
Page 21 of 79