Advertisement
Quick Links
PLX51-DF1-ENI Quick Start Guide
Note: Before installing, configuring, operating, or maintaining ProSoft Technology products, please review this information and
the information located on
www.prosoft-technology.com
your ProSoft Technology product.
Installation and maintenance of your ProSoft Technology product(s) should be carried out by suitably trained personnel in
accordance with applicable codes of practice. In case of malfunction or damage, no attempts of repair should be made. Your
ProSoft Technology product(s) should be returned to the manufacturer for repair. Do not dismantle the product.
For professional users in the European Union
If you wish to discard electrical and electronic equipment (EEE), please contact your dealer or supplier for further
information.
WARNING – Cancer and reproductive harm –
Your Feedback Please
We always want you to feel that you made the right decision to use our products. If you have suggestions, comments,
compliments or complaints about our products, documentation, or support, please write or call us.
ProSoft Technology, Inc.
+1 (661) 716-5100
+1 (661) 716-5101 (Fax)
www.prosoft-technology.com
support@prosoft-technology.com
®
ProSoft Technology
, is a registered copyright of ProSoft Technology, Inc. All other brand or product names are or may be
trademarks of, and are used to identify products and services of, their respective owners.
Documentation is subject to change without notice.
North American Hazardous Location Approval
The following information applies when operating the product in hazardous locations:
THIS EQUIPMENT IS AN OPEN-TYPE DEVICE AND IS MEANT TO BE INSTALLED IN AN ENCLOSURE SUITABLE
FOR THE ENVIRONMENT SUCH THAT THE EQUIPMENT IS ONLY ACCESSIBLE WITH THE USE OF A TOOL.
SUITABLE FOR USE IN CLASS I, DIVISION 2, GROUPS A, B, C AND D HAZARDOUS LOCATIONS, OR
NONHAZARDOUS LOCATIONS ONLY.
Required Software
The PLX51-DF1-ENI requires the ProSoft PLX50 Configuration Utility to setup and configure. The software installation can be
found at:
www.prosoft-technology.com
ProSoft Technology, Inc.
June 2019
for the latest software, documentation, and installation files specific to
www.p65warnings.ca.gov
Page 1 of 2
v1.4
Advertisement
Related Manuals for ProSoft PLX51-DF1-ENI
Summary of Contents for ProSoft PLX51-DF1-ENI
- Page 1 ® ProSoft Technology , is a registered copyright of ProSoft Technology, Inc. All other brand or product names are or may be trademarks of, and are used to identify products and services of, their respective owners. Documentation is subject to change without notice.
- Page 2 The PLX51-DF1-ENI has DHCP enabled as factory default. Launch the DHCP server for the ProSoft PLX50 Configuration Utility to assign an IP address to the module. The user can then configure the module with ProSoft PLX50 Configuration Utility. Support, Service, and Warranty Note: For technical support calls within the United States, ProSoft Technology’s 24/7 after-hours phone support is available...
Need help?
Do you have a question about the PLX51-DF1-ENI and is the answer not in the manual?
Questions and answers