Configuration Webpage Setup - ProSoft ICX35-HWC User Manual

Connecting to the ICX35-HWC
User Manual
2.1

Configuration Webpage Setup

1 Insert the SIM card on the front of the module.
2 Ensure that the module is connected to the network.
3 Apply power to the module.
4 Log into the radio's configuration webpage. The default IP address of the
ICX35-HWC is 192.168.0.250. If your PC is on a different subnet, temporarily
set the IP address of your PC to 192.168.0.xxx with a subnet of
255.255.255.0
5 Open a web browser and enter the ICX35-HWC default address of
http://192.168.0.250:8080
You can also use ProSoft Discovery Service to set a temporary IP address.
You can download and install ProSoft Discovery Services from the ProSoft
website at www.prosoft-technology.com.
6 Once the ICX35-HWC homepage opens, enter the U
P
ASSWORD
U
SERNAME
Note: Be sure to change your password once you log in. You can do this by navigating to
Administrator > Access Control > Web Login. Be sure to click Apply after entering your new
credentials.
Page 12 of 79
to log in. You will be able to customize these later. The default
is 'admin' and the default P
ICX35-HWC ♦ Industrial Cellular Gateway
SERNAME
is 'password'.
ASSWORD
3G/4G LTE
and
ProSoft Technology, Inc.
April 21, 2016