Installation; Extruder Assembly - FLASHFORGE 3D PRINTER CREATOR PRO 2 User Manual

2.2.2 Installation

1.Extruder Assembly

1. Lower the platform first and place the
dual extruder on the extruder seat.
2. Take the M2.5 Allen Wrench from the
tool bag and four M3 bolts from the
accessory kit.
3. Adjust the extruder location to align the
bolt holes.
Secure the extruder onto the extruder
4.
seat by screwing the M3 bolts in.
11
Bolt Hole Bolt Hole