Mirror / Duplicate Functions - FLASHFORGE 3D PRINTER CREATOR PRO 2 User Manual

Mirror / Duplicate Functions

Print two same models, choose duplicate mode; print two mirror models, choose mirror
mode. Under mirror or duplicate modes, two extruders print models simultaneously.
Note：the X-axis size of model should less than 80mm with mirror or duplicate mode.
Flashprint - untitle.fpp
File(F) Edit(E) Print(P) View(V) Tools(T) Help(H)
View
Set Extruder
Move
Use Right Extruder
Rotate
Use Left Extruder
Scale
Use Dual Extruder(Duplicate)
Use Dual Extruder(Mirror)
Cut
Extruder
FlashForge Creator Pro 2
1.Choose model and click [Extruder] to start extruder setting.
Flashprint - untitle.fpp
File(F) Edit(E) Print(P) View(V) Tools(T) Help(H)
View
Move
Rotate
Scale
Cut
Extruder
FlashForge Creator Pro 2
2.After the mirror or duplicate models appears on the build area, click [Print].
Note：Because of height difference between two extruders under the mirror mode,
compensation layer may be print. So adding raft is suggested in the mrrior mode.
Load
Reset
Load
Supports Print
Supports Print
47