FLASHFORGE 3D PRINTER CREATOR PRO 2 User Manual page 50

Add Supports
Adding supports for suspended structure model to ensure print success.
Flashprint - untitle.fpp
File(F) Edit(E) Print(P) View(V) Tools(T) Help(H)
Flashprint - untitle.fpp
File(F) Edit(E) Print(P) View(V) Tools(T) Help(H)
Add
Delete
Model
Celect
FlashForge Creator Pro 2
1.Click [Supports] icon and start support setting. Auto support setting is available. Click
[Delete] on the left and support delete supports by manual.
Supports Options
Supports Type：
Overhang Threshold：
Pillar Size:
Touch Platform Only：
OK
2.Click [Support Options] to choose
tree-support or linear-support. Overhang
thresholds means the angle of the model
suspended, if it is greater than this angle,
the support will be generated.
Supports
Options
Treelike
55°
1.5mm
Cancel Restore Defaults
Load Supports Print
Auto Clear Back
Supports Supports
Linear
Auto
Supports
3.Click [Auto Supports] and supports
create autocratically.
48