Terms; Product Parameters - FLASHFORGE 3D PRINTER CREATOR PRO 2 User Manual

2.1.3 Terms

Build Plate
Build Tape
Build Volume
Leveling Nuts
Extruder
Nozzle
Filament Intake
Filament Guide Tube
Stamping Wrench
Unclogging Pin Tool

2.1.4 Product Parameters

Name
Number of Extruder
Print Technology
Screen
Build Volume
Layer Resolution
Build Accuracy
Print Filament
Filament Diameter
Nozzle Diameter
Print Speed
Software
Support Format
AC Input
Connectivity
Internal Storage
The surface on which the Creator Pro 2 builds an object.
The blue tape that covers Creator Pro 2's build plate so that
the object can stick to the build plate well. Please change it
when the adhesion is not good.
The three dimensional amount of space that an object will use
once it is completed. The largest build volume of Creator Pro 2
is 200*148*150mm.
Nuts under the platform that are used for adjusting the
distance between the nozzle and build plate.
The device that draws the filament from the spool, melts
it and extrudes it through a nozzle onto the build plate.
Also called"print head", which located at the bottom of the
extruder where heated filament is squeezed out.
An opening located at the top of the extruder.
A plastic piece that guides the filament from the filament
box to the filament intake.
A tool that used for seizing the nozzle's metal cube.
A tool that used for cleaning and unclogging the extruder.
Creator Pro 2
2（independent）
Fused Filament Fabrication(FFF)
3.5'' Touch Screen
200*148*150mm;
Mirror mode:80*148*150mm; Duplicate mode:95*148*150mm
0.1-0.4mm
±0.2mm
PLA/PVA/ABS/HIPS
1.75mm
0.4mm
10-100mm/s
FlashPrint
Input:3MF/STL/OBJ/FPP/BMP/PNG/JPG/JPEG Output:GX/G
Input:100-240VAC,47-63Hz; Power:320w
SD card，USB cable
No
08