Tools Interface; Filament; Level - FLASHFORGE 3D PRINTER CREATOR PRO 2 User Manual

Tools Interface

Filament

Level

Home Manual
Print Preheat Tools
Setting Status About
Tools interface included filament, level, Home, Manual, Setting, Status and About.
L Extruder R Extruder
Heating...
Load Load
L Extruder 75℃ / 220℃
Unload Unload
[Filament]
Filament load and unload setting.
Filament Level Home Manual
Please wait, device is homing.
Next
Setting Status About
[Level]
Adjust platform flatness by manual leveling.
24