How To Create .G File? - FLASHFORGE 3D PRINTER CREATOR PRO 2 User Manual

How to create .g file?
3.3
By default, the left extruder is used as a supporting material extruder, and the right
extruder is a printing extruder. When printing a monochrome model, if the user does
not set it, the right extruder is automatically used as the printing extruder.
Flashprint - untitle.fpp
Flie(F) Edit(E) Print(P) View(V)
Print
Machine Type
1.Click [Print]-[Machine Type] to select FlashForge Creator Pro 2.
Flashprint - untitle.fpp
File(F) Edit(E) Print(P) View(V) Tools(T) Help(H)
2.Click the [Load] icon to load a .stl model file and the object will display on the build
area.
Print
I want to： Preview
FlashForge Creator Pro 2
Machine Type：
ABS
Material Right：
ABS
Material Left：
Enable
Supports：
Enable
Raft：
Resolution：
Low（Faster）
Standard
High（Slower）
More Options >>
OK
3.Click [Print] and enter the setting window. Click [Ok] and save the .g file to SD card.
Insert the SD card to the machine and start to print.
Tools(T) Help(H)
Ctrl+P
FlashForge Creator Pro 2
FlashForge Creator Pro
FlashForge Creator 3
FlashForge Dreamer
FlashForge Finder
FlashForge Guider
FlashForge Guider II
Load
Print When Slice Done
Wall
Brim
Cancel Save Configuration
Supports Print
Preview: Check the function recommend.
Machine Type: FlashForge Creator Pro 2.
Materials: Choose the targeted materials.
Supports:You are suggested to select
[Enable].
Raft: You are suggested to select [Enable].
Resolution: You are suggested to select
[Standard].
More Options: You are suggested to keep
them default.
Note: default parameter setting is good for
first users.
44