Manual Fine Calibration; Expert Mode - FLASHFORGE 3D PRINTER CREATOR PRO 2 User Manual

Manual fine calibration
This assistant is for advanced users only.
After a printer calibration. Fine-tune the
calibration offsets of X or Y axis if needed.

[Expert Mode]

Simplified calibration for experienced users in the expert mode. According to the
deviation value of the model printed by two extruders on the same axis, the users adjust
the place of exrtuder on the X or Y axis.
Manual fine calibration
X- 0.00 X+
Y- 0.00 Y+
When the left extruder prints to the right on the X axis，tap X- ; When the left extruder
prints to the left on the X axis，tap X+.
When the right extruder prints to the left on the Y axis，tap Y- ; When the right extruder
prints to the right on the X axis，tap Y+.
简体中文
English
繁體中文
日本語
Deutsch
한국어
[Language]
Support Chinese, English, Japanese, Germany, French and Spanish.
Next
X-
L
L
Y-
R
OK
X-
R
R
Français
Spanish
27
L L
R