Table of Contents
Advertisement
Chapter 3: Slicing Software
Using slicing software FlashPrint to process .stl File and .obj File to .g file, which can
be printed by Creator Pro 2.
Installation
3.1
3.1.1 How to get FlashPrint?
There are two ways to get FlashPrint software:
Method 1：
To get the installation package from the SD card in the accessory kit.
Method 2：
Visit website www.flashforge.com, and download the latest venison in
Download Center.
3.1.2 How to start-up?
Decompress the zipped file or start the installation program, and then install the software
according to the direction.
Start the software with the start menu shortcut by left double clicking.
Exploring FlashPrint
3.2
Note：Creator Pro 2 support printing by FlashPrint with USB cable.
3.2.1 Machine Type Selection
Attention! After starting FlashPrint, you need to select the targeted machine type first.
When you start FlashPrint, a dialog box will pop up. Just need to select FlashForge
Creator Pro in the machine type list and click [OK]. You can also change the machine
type via clicking [Print]--[Machine type]. Showed the picture below:
Flashprint - untitle.fpp
Flie(F)
Edit(E) Print(P) View(V)
Print
Machine Type
Tools(T) Help(H)
Ctrl+P
FlashForge Creator Pro 2
FlashForge Creator Pro
FlashForge Creator 3
FlashForge Dreamer
FlashForge Finder
FlashForge Guider
FlashForge Guider II
30
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the CREATOR PRO 2 and is the answer not in the manual?
Questions and answers