Access The Additional Documents - Intel ISP1100 Quick Start Manual

NOTE
In geographic regions that are susceptible to electrical storms, it is
recommended that you plug the server into an AC surge suppressor.
1. Attach the female end of the appropriate AC power cord to the mating AC power receptacle on
the server back panel.
2. Plug the male end of the AC power cord into the AC power source (wall outlet).
3. Open the bezel door (A) to access the Power switch (C) as follows:
a. Grasp the tab (B) at each end of the hinged bezel door.
b. Gently pull the tabs out and down to swing open the hinged bezel door.
4. Press the Power switch (C) to apply power to the server and notice that the green LED power
indicator (D) is lit.
5. Refer to the Intel ISP1100 Internet Server Product Guide available on the Intel ISP1100
Internet Server Resource CD-ROM shipped with the server for additional operating
information. See the following "Access the Additional Documents" procedure for how to read
and print the documents from the CD-ROM.
B

Access the Additional Documents

This procedure describes how to access the documents included on the Intel ISP1100 Internet
Server Resource CD-ROM shipped with the server for additional operating and technical
information (refer to Figure 16).
NOTE
This procedure requires that you use another computer system that has a CD-
ROM drive and an operating system installed.
20
D C
Figure 15. Powering Up the Server
Intel ISP1100 Internet Server Quick Start Guide
A
A
B
OMO9443