Access The Server Product Guide; Using The Acrobat .Pdf Files - Intel AD450NX Quick Start Manual

4. Press the open/close button or gently push on the tray—it will automatically slide into the
drive.
5. Press the reset switch on the front panel to reboot the server.
6. When POST completes, the server beeps once, boots from the CD, installs a mouse driver, and
displays the CD-ROM menu bar. Use the arrow keys to scroll through the menu bar and to
view the tasks in the pop-up menus.
NOTE
If you do not see the CD-ROM menu but see the following message instead,
you need to change the "Boot Device Priority" to the CD-ROM. See "If
server won't boot from the CD" on page 13 for instructions.
Operating system not found

Access the server Product Guide

We provide two forms of Product Guide files on the CD:
•
.PDF files: read and print .PDF files using the Adobe
•
.PS (PostScript
Because printing from within Acrobat is time-consuming, we recommend printing only a small
range of pages for immediate use. If you want to print the entire Product Guide, we recommend
printing it from the .PS files. See "Using the PostScript .PS files" on page 13.

Using the Acrobat .PDF files

Before you can print the Product Guide from within Acrobat, you must connect a printer to the
parallel port.
1. From the CD-ROM menu bar, select Read/Print Manuals and press <Enter>. The Adobe
Acrobat reader will be automatically installed on RAM disk e: (simulated disk drive in RAM
memory) and automatically started. The reader lets you view and print out a copy of the server
Product Guide.
12 Quick Start Guide
A
A Open/close push-button switch
B CD tray
†
) files: print .PS files directly to a PostScript printer.
B
OM06774
† †
Acrobat Reader shipped on the CD.