Intel ISP1100 Quick Start Manual page 15

Remove the Rear I/O Filler Panel(s)
Perform the following procedure to remove the I/O filler panel(s) from the back panel of the server
(refer to Figure 11):
1. Use a Phillips screwdriver and remove the two screws (A) securing the filler panel retention
bracket (B) to the top edge of the server back panel.
2. Remove the retention bracket.
3. Remove the filler panel (C) from the expansion slot for the type of add-in card(s) you are
installing.
Intel ISP1100 Internet Server Quick Start Guide
Figure 11. Removing the Rear I/O Filler Panel(s)
A
B
C
OMO9439
15