Automatic Headlight Control And Static Cornering Light: Checking Function - Volkswagen Passat 2015 Manual

Passat 2015 ➤, Passat 2019 ➤, Passat Variant 2015 ➤, Passat Variant 2019 ➤
Maintenance - Edition 11.2020
– Check axle mountings also for following damage:
♦ Complete separation of rubber and metal parts.
♦ Large play between mounting and suspension link, which
has a considerably negative effect on the function of the
mounting.
Note
Superficial cracks and cuts as well as minor separations of
♦
the rubber element from the metal part do not significantly
affect the operation of the elasto-kinematic mounting and do
not constitute a basis for a complaint.
Damage to the thin rubber skin over cavities due to con‐
♦
struction is also permissible.
Play between bearing and axle component is permissible as
♦
long as there is no negative effect on the function of the
bearing.
4.2 Automatic headlight control and static
cornering light: checking function
Note
The automatic headlight control was formerly called driving light
assist.
• Vehicle must be in natural daylight.
– Switch on ignition.
– Turn light switch -4- to position "Auto" -2-.
46
4. Descriptions of work