Cisco ONS 15454 Manual page 61

Turning Up a Node
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Note Throughout this procedure, Side A refers to Slots 1 through 6, and Side B refers to Slots 12 through 17.
Procedure
Step 1 Disable automatic laser shutdown (ALS) on Side A or (for terminal nodes) the terminal side OSCM or
OSC-CSM card:
a) In the node view (single-shelf mode) or shelf view (multishelf mode), double-click the Side A or
terminal-side OSCM or OSC-CSM card.
b) Click the Maintenance > ALS tabs.
c) From the ALS Mode drop-down list, choose Disable.
d) Click Apply. Click Yes in the confirmation dialog box.
Step 2 If an OSC-CSM or OSCM card is installed on Side B, complete the following steps. If not, continue with
Step 3.
a) In the node view (single-shelf mode) or shelf view (multishelf mode), double-click the Side B OSCM or
OSC-CSM card.
b) Click the Maintenance > ALS tabs.
c) From the ALS Mode drop-down list, choose Disable.
d) Click Apply. Click Yes in the confirmation dialog box.
Step 3 Complete the
Step 4
Change ALS to Auto Restart on the Side A or (for terminal nodes) the terminal side OSCM or OSC-CSM
card:
a) In the node view (single-shelf mode) or shelf view (multishelf mode), double-click the Side A or
terminal-side OSCM or OSC-CSM card.
b) Click the Maintenance > ALS tabs.
c) From the ALS Mode drop-down list, choose Auto Restart.
d) Click Apply. Click Yes in the confirmation dialog box.
Step 5
If an OSC-CSM or OSCM card is installed on Side B, complete the following steps. If not, you have completed
this procedure.
a) In the node view (single-shelf mode) or shelf view (multishelf mode), double-click Side B OSCM or
OSC-CSM card.
b) Click the Maintenance > ALS tabs.
c) From the ALS Mode drop-down list, choose Auto Restart.
d) Click Apply. Click Yes in the confirmation dialog box.
DLP-G314 Verifying OSCM Transmit Power, on page
NTP-G39 Verifying OSCM Transmit Power
• DLP-G46 Log into CTC
• NTP-G37 Running Automatic Node Setup
Required
Onsite or remote
Superuser only
62.
Turning Up a Node
61