Environmental And Operating Conditions; Personnel Qualification - SCHUNK KLM Series Assembly And Operating Manual

2.5 Environmental and operating conditions

2.6 Personnel qualification

Trained electrician
Qualified personnel
Instructed person
Service personnel of
the manufacturer
03.00 | KLM | Assembly and operating manual | en | 389173
• Make sure that the product is used only in the context of its
defined application parameters,
• Make sure that the product is not exposed to excessive
vibrations and/or strokes.
• Make sure that the environment is free from splash water and
vapors as well as from abrasion or processing dust. Exceptions
are products that are designed especially for contaminated
environments.
• Make sure that the environment is clean and the ambient
temperature corresponds to the specifications per the catalog.
• Ensure that no strong magnetic fields impair the function of the
product.
Contact your SCHUNK partner if the product is to be used in
strong magnetic fields.
Inadequate qualifications of the personnel
If the personnel working with the product is not sufficiently
qualified, the result may be serious injuries and significant
property damage.
• All work may only be performed by qualified personnel.
• Before working with the product, the personnel must have read
and understood the complete assembly and operating manual.
• Observe the national safety regulations and rules and general
safety instructions.
The following personal qualifications are necessary for the various
activities related to the product:
Due to their technical training, knowledge and experience, trained
electricians are able to work on electrical systems, recognize and
avoid possible dangers and know the relevant standards and
regulations.
Due to its technical training, knowledge and experience, qualified
personnel is able to perform the delegated tasks, recognize and
avoid possible dangers and knows the relevant standards and
regulations.
Instructed persons were instructed by the operator about the
delegated tasks and possible dangers due to improper behaviour.
Due to its technical training, knowledge and experience, service
personnel of the manufacturer is able to perform the delegated
tasks and to recognize and avoid possible dangers.
Basic safety notes
Technical data [ 15].
}
9