Definition Of Terms; Applicable Documents; Sizes; Variants - SCHUNK KLM Series Assembly And Operating Manual

Linear module
Table of Contents

Advertisement

General

1.1.2 Definition of Terms

1.1.3 Applicable documents

1.1.4 Sizes

1.1.5 Variants

1.2 Warranty

1.3 Scope of delivery

6
03.00 | KLM | Assembly and operating manual | en | 389173
The term "product" replaces the product name on the title page in
this manual.
• General terms of business *
• Catalog data sheet of the purchased product *
• Assembly and operating manuals of the accessories *
The documents marked with an asterisk (*) can be downloaded on
our homepage schunk.com
This operating manual applies to the following sizes:
• KLM 25
• KLM 50
• KLM 100
• KLM 300
This operating manual applies to the following variations:
• KLM, intermediate stop ZZA on the piston side
• KLM, intermediate stop ZZA on the piston rod side
If the product is used as intended, the warranty is valid for 24
months from the ex-works delivery date under the following
conditions:
• Observe the specified maintenance and lubrication intervals
• Observe the ambient conditions and operating conditions
Parts touching the workpiece and wear parts are not included in
the warranty.
The scope of delivery includes
• Linear module KLM in the version ordered
• 2x shock absorber LMST (KLM; 25, 50, 100, 300)
• 2x driver LMNS xxx01 (KLM 50, 100, 300)
• Assembly and Operating Manual
• Accessory pack

Advertisement

Table of Contents
loading

Table of Contents