Intermediate Stops - SCHUNK KLM Series Assembly And Operating Manual

Handling

6.2 Intermediate stops

Intermediate stops execution 1
26
03.00 | KLM | Assembly and operating manual | en | 389173
CAUTION
Observe general notes at
Intermediate stops are add-on modules for linear modules. 2
models are available for all KLM linear modules:
• Execution 1: Attachment KLM piston-side
• Execution 2: Attachment KLM rod-side
Execution 1 is shown. In execution 2 the entire intermediate stop
is mounted on the other side of the module.
It is also possible to equip a linear module with one intermediate
stop each of execution 1 and 2. (2 intermediate positions)
End position sets can be used for stroke limiting, shock absorption
and monitoring of the intermediate position
The maximum possible intermediate position adjustment is
specified in the catalog.
Handling [ 24]
}
Final positions [ 24]
}