Table of Contents
Advertisement
1.4 Accessories
1.4.1 Sensors
03.00 | KLM | Assembly and operating manual | en | 389173
The following accessories are required for the module:
• Proximity switches NI
• LMAS stop screw (optional)
For information regarding which accessory articles can be used
with the corresponding product variants, see catalog data sheet.
Overview of the compatible sensors
Designation
Inductive proximity
switches
• Exact type designation of the compatible sensors see catalog.
• Information on handling sensors is available at schunk.com or
from SCHUNK contact persons.
Size
Type
25
IN-40-S-M8
50
IN-40-S-M8
100
NI 30 KT
300
NI 30 KT
General
7
Advertisement
Table of Contents
