Setting The Speed - SCHUNK KLM Series Assembly And Operating Manual

Commissioning

5.1 Setting the speed

22
03.00 | KLM | Assembly and operating manual | en | 389173
CAUTION
Material damage due to erroneous settings!
If the end position is approached too hard, the product may be
damaged.
Adjust exhaust throttle valve and shock absorber so that the
•
movement is braked smoothly.
Close exhaust throttle valve completely.
Ø
Open exhaust throttle valve until the product starts to move.
Ø
Continue to open the exhaust throttle valve incrementally until
Ø
the movement decelerates smoothly.
If the speed is too low, the product will brake too soon and
✓
the end position will be reached too slowly.
If the speed is too high, the product will impact against the
✓
end position and the shock absorber will be overloaded.
NOTE
A smooth motion may also be too slow in many use-cases. Further
settings can be made via the shock absorbers,
Adjustment of the shock absorber strocke [ 23].
}