Table of Contents
Advertisement
5 Commissioning
03.00 | KLM | Assembly and operating manual | en | 389173
CAUTION
Possible damage to the linear module when changing the air
supply!
Before operating with oil.-free air, the linear module should
never be operated with lubricated air.
CAUTION
Possible damage to the linear module!
If the unit moves too hard into the end position, the linear
module may be damaged.
A linear movement must always be free of impact and bounce.
•
For this purpose, carry out sufficient throttling and damping,
•
Adjustment of the shock absorber strocke
Observe the specifications in the catalog data sheet.
•
• Check technical specifications.
• Do not use the linear module until you have determined that it
is in perfect operating condition, after having checked for
compliance with all permissible operating parameters.
• Regulate the poerating speed of the cylinder with regulator
valves. Starting slow, increase the speed until the desired
operating speed is reached.
• Take measures to prevent impermissible forces or jolts.
• Do not subject the linear module to loads outside of the
operating range.
– Excessive loads can result in damage or inaccuracy of the
guide unit.
– The maximum permissible loads are specified in our standard
catalog.
Commissioning
[
}
23].
21
Advertisement
Table of Contents
