Connections; Mechanical Connection - SCHUNK KLM Series Assembly And Operating Manual

4.3 Connections

4.3.1 Mechanical connection

Check the evenness
of the bolting surface.
Mounting
03.00 | KLM | Assembly and operating manual | en | 389173
WARNING
Risk of injury due to unexpected movements of the machine/
system!
Moving the axes may cause serious injuries.
Before performing assembly and adjustment works, switch off
•
the energy supply.
Make sure there is no residual energy in the system.
•
The figure refers to the whole bolting surface.
Requirements for the evenness of the bolting surface
Zulässige Unebenheit [mm]
< 0.02
The linear module may be selectively attached to the body or the
carriage. Similarly, the structure may be optionally attached to the
end carriage or the base body.
The following drawings show the mounting of the linear module to
the base body and the securing of the structure of the face plates.
Assembly
17