Setup; Flow Of Setup; Placing The Printer - Tally Dascom DT-330 User Manual

Tally Dascom DT-330

2.1 Flow of Setup

6. Connecting the Printer to the Host Computer

2.2 Placing the Printer

You can install this printer horizontally. With an optional mounting plate, you can also attach the
printer to a wall. It's recommended that the printer should be installed at a horizontal surface.
Horizontal Installation
You can install this printer horizontally. Place the printer on a solid, flat, stable surface; ensure the
printer is placed in a stable position and there is easy access for users to the control panel and roll
paper holder. Also ensure there is enough space for sufficient ventilation and for the printout.
Important Notes on Horizontal Installation:
The printer should be installed at a flat and steady place. The angle of inclination should not

exceed ± 10°(paper feed direction) if tilt install printer, it does not allow to tilt by other
direction.
Keep printer far away from water sources.

Avoid placing the printer near vibration sources.


2 SETUP

1. Placing the Printer
2. Loading Paper Roll
3. Attaching Power
4. Printing Self-test
5. Adjusting the Paper Near-End Sensor
13
User Guide V1.0