Video Mask - Provision ISR IP Series User Manual

Page 16
IP CAMERA USER MANUAL
custom OSD over the image on the left side to set their position. Then press the "Save" button
to save the settings.

4.2.4 Video Mask

You can set 4 mask areas at most.
To set up video mask
1. Enable video mask.
2. Click "Draw" button and then drag the mouse to draw the video mask area.
3. Click "Save" button to save the settings.
4. Return to the live to see the following picture.
To clear the video mask:
Go to video mask menu and then click "Clear" button to delete the current video mask area.