Face Database Management - Provision ISR IP Series User Manual

Hide thumbs Also See for IP Series:

Table of Contents

Page 26

C. Show the face comparison will enable/disable the face recognition area in the local screen

D. The "Alarm Out1/2" are the triggers for successful face match.

Now you will have to set the detection area. Click on the "Area" tab to get to the interface

shown below.

6. Set the Detection area as well as the minimum and maximum face size for detection. Click on "Save"

to confirm.

4.4.2 Face Database Management:

The face database is source for the EC-001 to compare faces with and perform face recognition.

Note that database information is not shown unless searched by the user

Adding a single person to the database:

Click on

to add a new person to the database. Input the required details, and click on the

IP CAMERA USER MANUAL

A. Since the EC-001 can track and

follow faces in the scene, we can use the

"Deduplication Period" so the unit will

ignore a face for the set period after the

first detection. In this case, since the

deduplication period is set to 4 seconds,

A man standing in front of the EC-001

for a long duration will trigger a face

detection event every 4 seconds.

B. The similarity threshold means how

accurate the match result comparing to the

database image.

Table of Contents

Show Quick Links

Table of Contents

Do you have a question about the IP Series and is the answer not in the manual?

Ec-001