Date & Time Configuration; Local Config - Provision ISR IP Series User Manual

Page 9
4.1.2 Date & Time Configuration
Setting steps:
1. Go to Config→Date & Time menu as shown below.
2. Set the time zone.
3. Enable DST mode if required. DST settings are already configured according to your time
zone. If you wish to set the DST manually, switch to "Manual DST" and set it accordingly.
4. To set the date and time, click on the "Date and Time" tab. You may synchronize the
camera time with an NTP server (Internet connection required), synchronize the camera time
with the time of the computer you are using or set the time manually.

4.1.3 Local Config

Got to "System Configuration" →"Local config" as shown below:
1.
From here you can set the path on your computer where local snapshots and videos will
be saved.
You can also choose if the camera will show the current bit-rate on the live-view image
IP CAMERA USER MANUAL