Provision ISR IP Series User Manual page 25

Page 20
IP CAMERA USER MANUAL
tab is "SD Card Full":
Enable the alarm if required. This alarm will only be relevant if "Recycle Record" is not
marked. If "recycle record" is active, the SD card will never get full.
After enabling the alarm, choose the responses required from the camera in case the alarm
will be active. After the setting is complete, click "Save".
Next is the "SD Card Error" Tab. This alarm will be triggered if any fault will be developed
with the SD card. It can be a malfunction or removing the SD card from the camera.
To activate it, enable the alarm.
After enabling the alarm, choose the responses required from the camera in case the alarm
will be active. After the setting is complete, click "Save".
Next is the "IP Address Collision". This alarm will be triggered when another device in the