Storage - Provision ISR IP Series User Manual

Page 10
(Local interface only).
Smart snapshot will save analytics pictures (Face detection/recognition) on the pictures
local folder

4.1.4 Storage

The SD card feature allows you to insert an SD card into the camera and enable the camera to
operate with a local storage. The SD card will be used for both snapshot and video files. You
can allocate a certain percentage for each from the settings menu.
1. Go to "System Configuration" →"Storage" as shown below:
If it is the first time you are using the SD card with the camera or if the state is showing
any value different than "Normal", you should click on "Format" before the SD card
will be available for recording.
Click "Eject card" to stop writing data to SD card and allow you to remove it safely.
Inserting an SD card to the camera must be done while the camera is powered off.

Note: Using of SD card function should be coordinated with motion or sensor
alarms.
The following table will explain the available detail field.
Parameter
Capacity
Used capacity
Remaining Capacity
State
Snapshot Quota
Video Quota
IP CAMERA USER MANUAL
The total capacity of the SD card
The capacity currently being used
The available capacity
The state of the SD card.
The percentage of the SD card dedicated for Snapshots
The percentage of the SD card dedicated to Videos
Meaning