Face; Face Recognition - Provision ISR IP Series User Manual

Page 25

4.4 Face

The EC-001 offers advanced face detection/recognition analytics. User for identifying guests
and staff together with keeping an optional record of the visitors and their temperature status.

4.4.1 Face Recognition

Face detection Analytics will detect all faces within a defined area and save it to a local
storage (SD Card)
1. Go to "Advanced Analytics"→ "Face Detection" to get to the interface as shown below:
2. The face detection analytic is enabled by default and cannot be disabled. Disabling this
feature will stop all critical processes of mask detection and temperature measurement.
3. Set weather to save the scene image (Source Information) or the face image (Face Information)
4. Set the Alarm response as follows and click "Save" to confirm:
Alarm Out
Trigger Snap
Trigger SD Recording
Trigger Email
Trigger FTP
5. Now we should set the facer recognition by accessing the Comparison config tab.
IP CAMERA USER MANUAL
Alarm Triggers:
triggers the alarm out relay
takes a snapshot (SD card must be available)
Initiates video recording over the SD card (SD card
must be available)
sends an email as configured in the Email section.
send a snapshot as configured in the FTP section