Table of Contents
Advertisement
Installation Overview
Default Network Settings
IP address:
192.168.250.250
Subnet mask:
255.255.0.0
Gateway address:
192.168.250.1
Hardware Installation
Hardware Installation
The enables communications with serial devices over an Ethernet network. The
DeviceMaster UP provides for remote management, configuration, and
connectivity through its 10/100BASE–T Ethernet connection.
Use the links below to locate installation procedures for the following models:
Ports
Model Description
DB9 serial port with one
1†
Ethernet port
1
Embedded system
DB9 serial ports with two
4†
Ethernet†† ports
†
The DeviceMaster UP 4 -port models also include DB9 to RJ45 adapters.
††
One of the Ethernet ports on the DeviceMaster UP 4-port is a built-in
downstream port for daisy-chaining DeviceMaster UP systems or other
network-ready devices.
Installation Procedure
1-Port Installation
on Page 10
1-Port Embedded Installation
4-Port Installation
on Page 16
DeviceMaster UP User Guide: 2000451 Rev. C - 9
on Page 12
Advertisement
Table of Contents
Troubleshooting
