Labeling Requirements (Fcc 15.19); Modifications (Fcc 15.21); Serial Cables (Fcc 15.27); Underwriters Laboratory - Comtrol DeviceMaster Up Hardware Installation Manual

Labeling
Requirements (FCC
15.19)
Modifications (FCC
15.21)
Serial Cables (FCC
15.27)
Underwriters
Laboratory
Important Safety
Information
Warning
Hardware Specifications
This equipment complies with part 15 of FCC rules. Operation is subject to the
following two conditions:
• This device may not cause harmful interference.
• This device must accept any interference received, including interference that
may cause undesired operation.
Changes or modifications to this equipment not expressly approved by Comtrol
Corporation may void the user's authority to operate this equipment.
This equipment is certified for Class A operation when used with unshielded
cables on models with the RJ45 connectors and with shielded cables on all models
with DB9 connectors.
This equipment is Underwriters Laboratory "UL" listed.
To avoid contact with electrical current:
• Never install electrical wiring during an electrical storm.
• Never install the power plug in wet locations.
• Use a screwdriver and other tools with insulated handles.

Labeling Requirements (FCC 15.19)

DeviceMaster UP User Guide: 2000451 Rev. C - 37