1-Port Embedded; 4-Port (Db9); Notices; Radio Frequency Interference (Rfi) (Fcc 15.105) - Comtrol DeviceMaster Up Hardware Installation Manual

1-Port Embedded

1-Port Embedded

4-Port (DB9)

Notices

Radio Frequency
Interference (RFI)
(FCC 15.105)
36 - DeviceMaster UP User Guide: 2000451 Rev. C
This illustrates the DeviceMaster UP 1-port Embedded system that uses a
5-30VDC power supply. See
can provide a power supply for the DeviceMaster UP.
The PWR LED for the DeviceMaster UP 4 with DB9 ports is on the other side of
the unit.
This equipment has been tested and found to comply with the limits for Class A
digital devices pursuant to Part 15 of the FCC Rules.
This equipment generates, uses, and can radiate radio frequency energy, and if not
installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try and
correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Power Supply for the 1-Port on Page 32 so that you
Hardware Specifications